pdb_matek1_1_1
matek

Matek Mini Power HUB with BEC 5V & 12V

$10.99

In stock

SKU: MPDB Categories: ,
Description:
– Band name: Matek
– Item name: 
Matek Power Distribution Board
– Dimensions: 36 x 36mm
– Weight: About 6g
– Mounting holes 30.5mm square spacing
Features:– 2oz copper & 4-layers PCB.
– ESC & Battery solder tabs in pairs.
– Solder Bridges of various voltage for Camera & VTX.
– DC/DC synchronous buck regulator, Efficiency is up to 95%.
– TVS(Transient Voltage Suppressor) protection for DC/DC chip.
– 5V & 12V Output LED indicators & Short circuit tolerant.Specification:
General:
– Input voltage range (2S-6S operation): 7.2 – 26VDC
– Regulated 5V and 12V outputs
– LED power indicators ( 5V & 12V outputs )
– 4 ESC outputs

ESC outputs:

– Continuous current: 20A per output
– Peak current (10 seconds/minute): 30A per output

BEC 5V output:

– Designed for RC Receivers, Flight controllers, OSD, and Servos.
– Voltage: 5.0 +/- 0.1VDC
– Continuous current: 3 Amps
– Short-circuit tolerant (10 seconds/minute)
– LED (indicates voltage is in regulation, within 10%)

BEC 12V output:

– The battery should be 4S~6S LiPo
– Standard output designed to power cameras and video transmitters,etc.
– Voltage: 12.0 +/- 0.2VDC
– Continuous current: 2 Amps (Max.3A 10s/minute)
– Short-circuit tolerant (10 seconds/minute)
– LED (indicates voltage is in regulation, within 10%)

CAM & VTX voltage bridge

– 3S operation. choose “VCC” for 12V camera & 12V VTX,  VCC=Battery Voltage.
– 4~6S operation, choose “12” for 12V camera & 12V VTX
– 3~6S operation, choose “5” for 5V camera
– Video pass through from the “CAM” pad to the “VTX” pad

Additional Information

Weight .25 lbs
Dimensions 5 x 3 x .25 in